arm_q7_to_q31.c

Go to the documentation of this file.

/* ----------------------------------------------------------------------------    
* Copyright (C) 2010-2014 ARM Limited. All rights reserved.    
*    
* $Date:        19. March 2015
* $Revision:    V.1.4.5  
*    
* Project:      CMSIS DSP Library    
* Title:        arm_q7_to_q31.c    
*    
* Description:  Converts the elements of the Q7 vector to Q31 vector.  
*    
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Redistribution and use in source and binary forms, with or without 
* modification, are permitted provided that the following conditions
* are met:
*   - Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*   - Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in
*     the documentation and/or other materials provided with the 
*     distribution.
*   - Neither the name of ARM LIMITED nor the names of its contributors
*     may be used to endorse or promote products derived from this
*     software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.   
* ---------------------------------------------------------------------------- */

#include "arm_math.h"

void arm_q7_to_q31(
  q7_t * pSrc,
  q31_t * pDst,
  uint32_t blockSize)
{
  q7_t *pIn = pSrc;                              /* Src pointer */
  uint32_t blkCnt;                               /* loop counter */

#ifndef ARM_MATH_CM0_FAMILY

  q31_t in;

  /* Run the below code for Cortex-M4 and Cortex-M3 */

  /*loop Unrolling */
  blkCnt = blockSize >> 2u;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
   ** a second loop below computes the remaining 1 to 3 samples. */
  while(blkCnt > 0u)
  {
    /* C = (q31_t) A << 24 */
    /* convert from q7 to q31 and then store the results in the destination buffer */
    in = *__SIMD32(pIn)++;

#ifndef ARM_MATH_BIG_ENDIAN

    *pDst++ = (__ROR(in, 8)) & 0xFF000000;
    *pDst++ = (__ROR(in, 16)) & 0xFF000000;
    *pDst++ = (__ROR(in, 24)) & 0xFF000000;
    *pDst++ = (in & 0xFF000000);

#else

    *pDst++ = (in & 0xFF000000);
    *pDst++ = (__ROR(in, 24)) & 0xFF000000;
    *pDst++ = (__ROR(in, 16)) & 0xFF000000;
    *pDst++ = (__ROR(in, 8)) & 0xFF000000;

#endif //              #ifndef ARM_MATH_BIG_ENDIAN

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.    
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

#else

  /* Run the below code for Cortex-M0 */

  /* Loop over blockSize number of values */
  blkCnt = blockSize;

#endif /* #ifndef ARM_MATH_CM0_FAMILY */

  while(blkCnt > 0u)
  {
    /* C = (q31_t) A << 24 */
    /* convert from q7 to q31 and then store the results in the destination buffer */
    *pDst++ = (q31_t) * pIn++ << 24;

    /* Decrement the loop counter */
    blkCnt--;
  }

}